Call us now: 01246 589010

How to mix Two-Part Resin Binder for Resin Bound Surfacing

How to Mix Resin Binder for Resin Bound Gravel Surfacing

When you are satisfied that all of the materials are present and sectioned into individual mixes, it’s time to start mixing the resin components. After opening the tubs containing both parts of the resin, mix the resins by pouring the part A component into the part B bucket and mix for around 30 seconds using a motorised paddle mixer until the mix turns to a creamy consistency.

While the resin is mixing, we recommend adding the aggregate to the forced action mixer and allowing it to be mixed dry for 30-60 seconds to remove any dust which may have gathered on the aggregate.

Be careful not to over-mix the resin and to mix each batch for the same period of time, using the same method to give the most consistent finish after the screed has cured.

BackGround Stabilisation Preparation

Mixing Resin & Aggregate


No products

£ 0.00 Shipping
£ 0.00 Tax
£ 0.00 Total

Cart Check out